AYCTelecom IP-PBX for up to 25 users

Low on cost - high on features

A full featured IP-PBX telephone system with Voicemail, Computer Telephony Integration and Music on Hold.                  [Image]

Benefits

Low cost IP telephone calls.

Developed for the small business user, the IP telephony system had been designed as a 'stand alone' system at a fantastic price

A full featured telephone system that provides all the functionality you normally expect from a normal telephone system costing twice as much. 

You can use a combination of analogue and VoIP phones with appropriate adaptors for analogue to SIP conversion.

Ease of installation, maintenance and operation reduces costs further.

IPcts can be plugged into existing LAN with telephone and PC sharing one cable, so no additional cabling is required.

Your wireless network can be utilised with wireless SIP handsets

Features

*Voicemail built in

*Music on hold built in

*Fully SIP compliant

*Least cost routing, when an adaptor is added for analogue or digital lines.

*Talk FREE to remote workers.

*Web browser configurable

*19", wall or desk mountable

*Wireless handsets when you install wireless LAN access points.

*Use analogue phones with SIP adaptor.

*Use SIP phones

Highlights

The system comes complete with:-

            • 16 x 25 capacity (16 trunks x 25 extensions - plug in trunk cards or add gateways for Analogue or ISDN as required)

            • IP Trunks from an IP Voice Service Provider

            • PBX functions

            o Make / Receive incoming and outgoing calls

            o DDI to users and/or Groups

            o Hold, Transfer, Divert, Do Not Disturb, Redial, Speed Dial

            o Trunk Groups, User Groups, Call Pickup, Group Pickup

            o Music On Hold - multiple interface

            o Message waiting

            o Call Barring

            • Compatibility with standard SIP handsets

            • Ability to use wireless/Mobile Handsets available (needs wireless LAN)

            • Multi Level / Multi Tenant Auto Attendant

            • Voicemail Centralized and for all users

            • ACD working

            • LCR / ARS

            • CTI for all users providing BLF, Call Control Buttons, DDI information

            • Instant Messaging

            • Windows Operator Console

            • Long Line remote extensions using IP network

            • IP Tie Trunks between systems

            • LAN & WAN ports with QOS between ports

Detailed features

Power Requirements

The chassis is powered via standard 100-240V AC mains at 50-60hz and can simply be plugged directly into any standard outlet. It is advisable, however, to pass the mains supply through an uninterruptible power supply (UPS) unit in case of power failures and voltage spikes.

Network Connectivity

The IPcts has two Network ports, LAN and WAN.

The LAN port is used to connect directly onto the local network using standard CAT5 through an RJ45 presentation. The LAN and WAN ports will auto detect the type of patch cable used to connect to the Customers Network Hub/Switch. Once connected into a LAN segment, the IPcts will communicate with all properly configured VoIPT’s and Gateways on the same subnet.

The WAN port can be used to connect directly to an NTU such as a broadband modem, leased line termination unit, www gateway etc. The WAN port provides Quality of Service (QoS) between itself and the LAN port in order to prioritise traffic coming into and going out of the local network. If QoS is not required or a 3^rd party QoS system is in place then the WAN port does not need to be used.

Example. IPcts connectivity

Web Browser Configurable / Remote configuration

Hardware Configurations and Capacities

A standard density IPcts can handle up to 25 non-blocking IP extensions and 16 IP trunk connections. This is available “out of the box” without additional option modules. Option modules are listed in two categories:

Analogue

The IPcts can be configured with a maximum of 2 IPcts-AT4 giving the system access to 8x Analogue trunk Lines.

Digital

The IPcts can be configured with a maximum of 2 IPcts-DT2 giving the system access to 4x ISDN2e trunk Lines (8x 64k channels of ISDN).

Option modules may be mixed and could, for example, give the IPcts system access to 4x Analogue Trunk lines and 2x ISDN2e Trunk lines simultaneously. This configuration would simply invlove installing 1 IPcts-AT4 and 1 IPcts-DT2 into the two available option module slots.

Note:

The trunk connections available in the IPcts System can be freely configured to include internal option modules, external gateways and IP trunks up to the limit of 16 trunks.